Through this period of understanding, I believe you are no stranger to the rolling shutter door, but for customers who want to further understand the relevant knowledge of this product, these contents are not enough. Today, Xiaobian will share with you the knowledge about the power supply requirements of roller shutter door, hoping to arouse your attention and let you have a deep understanding of Jinan roller shutter door. In this way, when you buy and use the roller shutter door, you can also have a clear idea and be in no hurry. I hope it will inspire and help you. Let's see the following details:

1、關于像或許寫字樓等出人人流較多的場所，其卷簾門的傳感器宜選用徽波傳感器。關于出人人流較少，勘探對象為中止或運動體的場所，其自動門的傳感器宜選用紅外傳感器或超聲波傳感器。

1. For places like shopping malls or office buildings where people flow more, the sensor of rolling shutter door should choose Huibo sensor. As for the places where the flow of people is less and the exploration object is stopped or moving, the sensor of the automatic door should be infrared sensor or ultrasonic sensor.

2、如果是用于室外的電動大門的配電線路，是裝設剩下電流動作保護器。

2. If the power distribution line is used for outdoor electric gate, the residual current action protector shall be installed.

3、別的，卷簾門配件的全部金屬構件及隸屬電氣設備的外陣可導電部分均應牢靠接地。

3. In addition, all metal components of rolling shutter accessories and external conductive parts of electrical equipment shall be firmly grounded.

4、再而，傳拍系統的巡視通道海隔20-30m或在連鎖機械旁應設置事故斷電開關或自鎖式按鈕。

4. Moreover, the patrol channel of the shooting system should be 20-30m away from the sea or set with an emergency power-off switch or self-locking button beside the interlocking machinery.

5、留意同一傳愉系統的電氣設備，宜由同一電源供電。當傳愉系統很長時，可按工藝分成多段，井由同一電源的多個回路供電。當主回路和操控回路由不同線路或不同電敵供電時，應設有連鎖裝置。

5. Pay attention to the same transmission system of electrical equipment, should be powered by the same power supply. When the transmission system is very long, it can be divided into multiple sections according to the process, and the well is powered by multiple circuits of the same power supply. When the main circuit and control circuit are supplied by different lines or different electric enemies, interlocking device shall be set.

上述內容就是給大家詳細講解的關于卷簾門對供電條件要求，相信大家都有進一步的學習和了解了。如果大家還想了解更多資訊，請繼續關注我們吧。

The above content is to give you a detailed explanation about the power supply requirements of rolling shutter door, I believe you have further study and understanding. If you want more information, please continue to follow us.